|
Here's a great example of just how easy it is!
|
0.00 Seconds Start
Windows and doors all unzip and onrolled.Family Tourer.Perfect ground is a slight down hill slope with persons heads pointing up hill. Put down tarp or rubber matting to protect floor and for easy cleaning .
Warning check for sharp sticks on ground
|
1.00 Seconds
Lay out tent and follow numbers in pegging. Start at the front right of tent . use metal mallet or better is a freedom peg hammer for putting in pegs.
3 types of pegs
Impact steel - Hard ground
Sand pegs - Sand or Mud
Normal steel - Most conditions
|
|
|
1.30 Seconds
Take centre pole which is the thickest pole and is two piece. Put though eyelet in centre of roof frame and lift up tent. This action lifts most of the family tourer.
|
1.30 Seconds
Brand new tents are a bit tight but will loosen up after the first use or if the tents have been pack away wet the pole may be tight.
|
|
|
2.00 Seconds
Now grab the two hockey sticks and thread them though the back loops.Don't miss any loops
|
2.10 Seconds
Make sure to put the black webbing over the nipples on the curved ends. This stops the tent sliding on the frame.
|
|
|
2.30 Seconds
Insert legs into end of curved poles. Don't forget black webbing. Must be on before you lift tent.
|
2.45 Seconds
Now stand up frame digging spike into ground pointing towards front of tent on a 45. degree angle
|
